Bending Resistance Tester

About Bending Resistance Tester

Bending Resistance Tester

Manufactured to perfection, we are one of the excellent and leading manufacturers, suppliers & exporters of Bending Resistance Tester. Under the supervision of experienced personnel, our offered range of resistance testing equipment is manufactured in compliance with international quality standards. Extensively used to measure the bending resistance of plastic film, paper, medical tubing, wire and paperboard, Bending Resistance Tester is highly appreciated among our clients for their accuracy, sturdy structure and unmatched performance.

Further details: 

The GLOBE Bending Resistance Tester consists of a balanced pendulum pivoted at its centre of gravity on two jewel bearings and provided with holes at different distance for attaching weights below the centre of pivot. The lower end of the pendulum is pointed and moves parallel to a scale mounted over the base of the instrument. The scale is graduated in both left and right directions. The upper end of the pendulum terminates in a triangular vane of specified width at the upper edge. The specimen presses against this vane and causes the pendulum to deflect when the test is conducted.

The upper edge of the vane is parallel to the specimen clamp. The specimen clamp is movable on the arm and can be positioned so that four different test lengths can be set. The arm carrying the clamp is rotated left or right at 2 rpm through approximately 20° by means of a reversing motor. The specimen clamp can be adjusted to the appropriate recess to select the test length.

The equipment is finished in bright chrome plating and shore blue matalic painting to give it a corrosion resistant finish.